StoneTech RS4-1G Restore Ceramic Tile and Grout Cleaner, 1-Gallon

StoneTech RS4-1G Restore Ceramic Tile and Grout Cleaner, 1-Gallon Review

StoneTech RS4-1G Restore Ceramic Tile and Grout Cleaner, 1-Gallon Feature

• Highly concentrated acidic cleaner and etching solution which restores ceramic tile and grout
• Professional strength, acidic formula renews your tile and grout
• Provides coverage for up to 8,000 square feet
• Safe and biogradable; produces no hazardous vapors
• Can be used as an etching material for masonry and marble

The StoneTech professional restore ceramic tile and grout cleaner is a highly concentrated acidic cleaner and etching solution which restores ceramic tile and grout. The liquid is safe and biodegradable, produces no hazardous vapors, and can be used on porcelain and glass. While it removes grout haze, and soap scum it may also be used as an etching material for masonry and marble. Other features include the ability to remove efflorescence and hard water deposits, as well as renewing your tile and grout. This cleaner features a professional strength, acidic formula, and provides up to 8,000 square feet of protection. Heavy Duty Acidic Tile & Grout Cleaner Acidic Stone Cleaner Heavy duty ACIDIC cleaner makes ceramic tile and grout look like new. Powers through hard water deposits, grout haze, efflorescence and soap scum. Features + Benefits: Renews tile & grout Cleans away hard water deposits, grout haze, efflorescence & soap scum Professional strength, acidic formula Where to Use: Ceramic tile, porcelain tile & grout. Masonry & concrete. Directions: Note: Directions may vary depending on size. Always test in a small inconspicuous area to determine ease of use and desired results. Make sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Heavy duty mixture may darken some surfaces. This acid-based cleaner will etch most marble, limestone and travertine surfaces. Will etch or corrode most metal surfaces. Mask off and protect any metals, baseboards or adjacent areas to avoid splashing, dripping, and overspray onto surfaces not intended to be cleaned. Spray directly onto soiled areas. Agitate with a scrub brush as needed. Remove using a clean wet towel or sponge. Rinse area well with clean water and wipe dry. Thoroughly rinse all metal surfaces with clean water. Clean and rinse towel/brush with water. Reseal cleaned area